Máy CẮT-TUỐT-DẬP tự động TR500

With industry-leading processing capability and less space requirement, the ShinMaywa TR500 series machines improve productivity and reduce processing cost.

Both-ends crimping machine with both-ends seal insertion unit TRD510WPA

The TR500 series has achieved the top-class maximum processing capacity of 6,000 pieces/hour as the single-wire crimping system that can use any genuine applicator of respective companies (compared to our company’s products).
This machine is provided with a newly developed system consisting of “S axis and Y axis” mechanism in the feed unit.
The latest controllers and servo motors have achieved high-speed and high accuracy crimping, which has significantly increased the processing capacity.
The newly belt feed designed mechanism unit allows delicate wires to be fed at high-speed.
In addition, the feedback correction control increased the cut length accuracy and stability using an encoder.
By reducing path line wire inlets to 50% from previous equipment, the setup time has reduced significantly.
This machine achieves high-speed performance, high durability, easy maintenance and very friendly software.

The TR500 is equipped with various options using high technical capabilities.
ShinMaywa Industries proposes best suited products for the ever-developing market.

Mô tả

Standard Specifications

Model			TR500	TRD510	TRD510WPA	TRD510WPSA
Maximum Processing capability^※1	Both-ends crimping	60 mm	6,000 pieces/hour	—
		100 mm	—	5,000 pieces/hour
		500 mm	4,800 pieces/hour	4,200 pieces/hour
		1,000 mm	4,200 pieces/hour	3,750 pieces/hour
	Seal insertion both-ends crimping	100 mm	—	—	3,000 pieces/hour
		500 mm	—	—	2,700 pieces/hour
		1,000 mm	—	—	2,500 pieces/hour
Cutting length	min. – max.		30 — 20,000 mm^※2	50 — 20,000 mm
Stripping length	min. – max.		1 — 10mm	1 — 16 mm
Crimping	Press capability		19.6 kN (2.0 t)	19.6 kN (2.0 t) Digital crimper
Crimping	Applicable terminal		Continuous open barrel, Side/end feed
Seal	Applicable seal		—	—	Outside diameter ⌀8 mm × length 12 mm or less, circular rubber seal^※3
Seal	Seal unit		—	—	3-module both-ends seal insertion	3-module single-end seal insertion
Equipment	Safety cover		Openable cover	Partial openable safety cover
	Wire chopper		Extra	Standard
	Terminal crimping monitor		Extra	Standard
Sensor	Crimping		Standard (photoelectric)	Standard (Terminal crimping monitor)
	Stripping		Standard
	Terminal presence		Standard
	Wire presence/Joint		Standard
	Wire Tension overload		Standard
	Wire slipping		Standard
Operation	Input		Touch panel	Mouse & keyboard
	Language		English/Chinese/Japanese	English/Spanish/Chinese/Thai/Japanese
	Operator permission setting		2 levels	3 levels
Wire feeding			Practical typical speed of belt-feeding mechanism: 6 m/s, Max. speed: 10 m/s
Driving motor			AC servo motor for all axes
Primary power source			Three-phase 200 VAC ±10% (50/60 Hz)
Max. power consumption			Approx. 0.4 kWh		Approx. 0.42 kWh
Air supply			0.5 MPa 150 ℓ/min (ANR)		0.5 MPa 170 ℓ/min (ANR)	0.5 MPa 160 ℓ/min (ANR)
Weight			Approx. 600 kg	Approx. 690 kg	Approx. 710 kg	Approx. 700 kg

Capability might change depending on the processing conditions and processing data.
A clamp for short wire may be required for both-ends crimping for 50mm (or less) wire.
For wire-seal combinations, please cosult with us in advance.

Máy CẮT-TUỐT-DẬP tự động TR500

Standard Specifications

Wire size application table

Sản phẩm tương tự

Đăng nhập